Sintered router for Granite and Agglomerates

• Dimensions: typically 22 mm diameter
• Connection: ½ gas
• Types: 1st/2nd position
• Rotation speed: 1st/2nd position: 4800-5500 RPM
• Feeding:
  • 1st Position: 150-250 mm/min
  • 2nd Position: 200-400 mm/min
• Maximum step:
  • 1st Position: single pass
  • 2nd Position: 0.5 mm

Electroplated router for Marble and Agglomerates

• Dimensions: typically minimum diameter (bottom groove) of 16 mm
• Connection: ½ gas
• Types: 1st/2nd position
  • For particularly hard marbles, the first electroplated position is replaced with a sintered version.
• Rotation speed: 1st/2nd position: 4800-5500 RPM
• Feeding:
  • 1st Position: 200-400 mm/min
  • 2nd Position: 300-600 mm/min
• Maximum step:
  • 1st Position: single pass
  • 2nd Position: 0.5 mm

Recommendations for use

The rotation and feed speeds are indicative and may vary from the specified values depending on the material being processed and the desired profile. The most suitable parameters for these variables will be provided upon delivery of the tools.

Adequate internal lubrication is essential for the proper functioning of the tools.
It is recommended to follow incremental settings and ensure that the second-position wheel removes the grooves left by the first-position wheel.